Illustrative alloy elbows, tees, reducers, and caps for a technical reference

Alloy flanges and fittings

254 SMO Pipe Fittings Manufacturer & Exporter

Name: 254 SMO Pipe Fittings
Brand: Raymond Tube Industries

Raymond Tube Industries manufactures, supplies, and exports 254 SMO / UNS S31254 pipe fittings for chloride-critical process, marine, and water-treatment piping systems. Buyers can define fitting geometry, NPS or DN, schedule or bore, end preparation, material and dimensional standards, inspection, testing, documentation, packing, quantity, and destination.

Technical snapshot

Key details for your specification.

Material identity

254 SMO / UNS S31254

Product route

Pipe Fittings

Dimensional control

ASME B16.9 or ASME B16.11 dimensional review

Service discussion

seawater and aggressive chloride-bearing media review

Controlled size architecture

Pipe fitting size and schedule matrix

NPS 1/2 through NPS 48 under ASME B16.9. Standard dimensions are shown for specification planning; availability, manufacturing route, and delivery are confirmed against the final RFQ specification.

Final RFQ confirmation

Class / schedule scope

Schedule or wall thickness as specified for the fitting geometry

Facing / end scope

Butt-weld bevel

ASME B16.9 butt-weld fittings nominal size and configuration guide
Nominal size	DN	Product	Standard	RFQ review
1/2"	DN 15	Butt-weld fitting	ASME B16.9	Final RFQ
3/4"	DN 20	Butt-weld fitting	ASME B16.9	Final RFQ
1"	DN 25	Butt-weld fitting	ASME B16.9	Final RFQ
1-1/4"	DN 32	Butt-weld fitting	ASME B16.9	Final RFQ
1-1/2"	DN 40	Butt-weld fitting	ASME B16.9	Final RFQ
2"	DN 50	Butt-weld fitting	ASME B16.9	Final RFQ
2-1/2"	DN 65	Butt-weld fitting	ASME B16.9	Final RFQ
3"	DN 80	Butt-weld fitting	ASME B16.9	Final RFQ
4"	DN 100	Butt-weld fitting	ASME B16.9	Final RFQ
5"	DN 125	Butt-weld fitting	ASME B16.9	Final RFQ
6"	DN 150	Butt-weld fitting	ASME B16.9	Final RFQ
8"	DN 200	Butt-weld fitting	ASME B16.9	Final RFQ
10"	DN 250	Butt-weld fitting	ASME B16.9	Final RFQ
12"	DN 300	Butt-weld fitting	ASME B16.9	Final RFQ
14"	DN 350	Butt-weld fitting	ASME B16.9	Final RFQ
16"	DN 400	Butt-weld fitting	ASME B16.9	Final RFQ
18"	DN 450	Butt-weld fitting	ASME B16.9	Final RFQ
20"	DN 500	Butt-weld fitting	ASME B16.9	Final RFQ
22"	DN 550	Butt-weld fitting	ASME B16.9	Final RFQ
24"	DN 600	Butt-weld fitting	ASME B16.9	Final RFQ
26"	DN 650	Butt-weld fitting	ASME B16.9	Final RFQ
28"	DN 700	Butt-weld fitting	ASME B16.9	Final RFQ
30"	DN 750	Butt-weld fitting	ASME B16.9	Final RFQ
32"	DN 800	Butt-weld fitting	ASME B16.9	Final RFQ
34"	DN 850	Butt-weld fitting	ASME B16.9	Final RFQ
36"	DN 900	Butt-weld fitting	ASME B16.9	Final RFQ
38"	DN 950	Butt-weld fitting	ASME B16.9	Final RFQ
40"	DN 1000	Butt-weld fitting	ASME B16.9	Final RFQ
42"	DN 1050	Butt-weld fitting	ASME B16.9	Final RFQ
44"	DN 1100	Butt-weld fitting	ASME B16.9	Final RFQ
46"	DN 1150	Butt-weld fitting	ASME B16.9	Final RFQ
48"	DN 1200	Butt-weld fitting	ASME B16.9	Final RFQ

Elbows, tees, reducers, caps, returns, and stub ends do not share identical dimensional availability. Confirm the exact fitting geometry before quotation.

Use the RFQ selector to state product form, NPS / DN, class or schedule, facing or end connection, testing, and documents for review.

Controlled size selector

Configure this alloy requirement.

Use the controlled NPS / DN conversion, then pass size, class or schedule, facing or end connection, and quantity to the RFQ.

Final RFQ confirmation

MaterialProductProduct typeSizeSchedule / boreQuantity

Selected requirement

254 SMO / UNS S31254 | 90 degree LR Elbow | 6" / DN 150 | Sch 80

ASME B16.9. Availability, manufacturing route, and delivery are confirmed against the final RFQ specification.

View technical details Request Technical Quotation

Engineering discussion

Context before component selection.

Engineering context

254 SMO pipe fittings cannot be defined by grade alone. Their engineering review depends on the exact product form, connection geometry, design boundary, material condition where relevant, inspection plan, and the project specification that governs acceptance.

Specification controls

For 254 SMO Pipe Fittings, the RFQ must turn 254 SMO / UNS S31254 into a defined material, product-form, dimensional, inspection, document-release, quantity, packing, and delivery record. This avoids using a general alloy or product label as an unapproved technical conclusion.

Procurement decision

Before issuing an order for 254 SMO Pipe Fittings, reconcile Pipe Fittings with the drawing or piping class, standard edition, test plan, acceptance authority, and certificate requirements. Any deviation, alternative material, or added test is a project engineering decision.

Standards and release

Define the basis, then document it.

Material route

Project-specific product-form standard to be confirmed against the purchase specification

Dimensional route

ASME B16.9 or ASME B16.11 dimensional review

Quality release

MTC, PMI, inspection records, and project document requirements

Applications and next steps

Connect the requirement to the right workflow.

chloride-critical process, marine, and water treatment systems

Specification-led pipe fitting packages

Project piping-class procurement

Drawing and data-sheet enquiries

Stainless Steel Pipe Fittings overviewReview the authoritative stainless steel pipe fittings product-family route.Material dataReview 254 SMO context.Product engineeringReview product configuration controls.Advanced RFQCapture enquiry data.

Buyer questions

Frequently asked questions.

Which pipe fittings can be reviewed in 254 SMO?

The required configuration must be identified by the drawing or piping class. State the form, dimensions, facing or end connection, material route, and inspection scope for technical review.

Which standards should accompany a 254 SMO pipe fittings enquiry?

Use the approved material product standard together with the governing dimensional standard, project specification, and any drawing or client inspection requirement.

Which records should be requested with 254 SMO pipe fittings?

Define the MTC type, heat traceability, PMI, dimensional record, test evidence, third-party inspection requirement, marking, packing, and release dossier before quotation.

Technical quotation

Turn this guidance into a controlled request.

Capture the material, product form, dimensions, standard, inspection, documentation, packing, and destination requirements for review.

Submit Technical RFQ Email Export Desk