Finished alloy flanges in multiple product forms

Alloy flanges and fittings

Nickel 200 Flanges Manufacturer & Exporter

Name: Nickel 200 Flanges
Brand: Raymond Tube Industries

This Nickel 200 / UNS N02200 flange route helps buyers define commercially pure wrought nickel components without confusing them with low-carbon Nickel 201. State ASTM B564, flange form, size, class, facing, bore, dimensional edition, medium, design and operating temperature, fabrication, inspection, certification, quantity, and destination.

Technical snapshot

Key details for your specification.

Material identity

Nickel 200 / UNS N02200 commercially pure wrought nickel

Material standard

ASTM B564 / ASME SB564 forging route

Product definition

Flange form, ASME or drawing dimensions, class, facing, and bore

Inspection

MTC, heat identity, chemistry review, dimensions, PMI strategy, and TPI as ordered

Controlled size architecture

Flange size and configuration matrix

NPS 1/2 through NPS 24 under ASME B16.5. Standard dimensions are shown for specification planning; availability, manufacturing route, and delivery are confirmed against the final RFQ specification.

Final RFQ confirmation

Class / schedule scope

Classes 150, 300, 400, 600, 900 and 1500. Class 2500 requires the applicable NPS and current governing table to be checked.

Facing / end scope

RF / RTJ as applicable

ASME B16.5 flanges nominal size and configuration guide
Nominal size	DN	Product	Standard	RFQ review
1/2"	DN 15	Flange	ASME B16.5	Final RFQ
3/4"	DN 20	Flange	ASME B16.5	Final RFQ
1"	DN 25	Flange	ASME B16.5	Final RFQ
1-1/4"	DN 32	Flange	ASME B16.5	Final RFQ
1-1/2"	DN 40	Flange	ASME B16.5	Final RFQ
2"	DN 50	Flange	ASME B16.5	Final RFQ
2-1/2"	DN 65	Flange	ASME B16.5	Final RFQ
3"	DN 80	Flange	ASME B16.5	Final RFQ
4"	DN 100	Flange	ASME B16.5	Final RFQ
5"	DN 125	Flange	ASME B16.5	Final RFQ
6"	DN 150	Flange	ASME B16.5	Final RFQ
8"	DN 200	Flange	ASME B16.5	Final RFQ
10"	DN 250	Flange	ASME B16.5	Final RFQ
12"	DN 300	Flange	ASME B16.5	Final RFQ
14"	DN 350	Flange	ASME B16.5	Final RFQ
16"	DN 400	Flange	ASME B16.5	Final RFQ
18"	DN 450	Flange	ASME B16.5	Final RFQ
20"	DN 500	Flange	ASME B16.5	Final RFQ
22"	DN 550	Flange	ASME B16.5	Final RFQ
24"	DN 600	Flange	ASME B16.5	Final RFQ

This table records nominal standard scope, not a promise that every type, class, facing, bore, or material combination is available.

Use the RFQ selector to state product form, NPS / DN, class or schedule, facing or end connection, testing, and documents for review.

Controlled size architecture

Flange size and configuration matrix

NPS 26 through NPS 60 under ASME B16.47. Standard dimensions are shown for specification planning; availability, manufacturing route, and delivery are confirmed against the final RFQ specification.

Final RFQ confirmation

Class / schedule scope

Series and class require technical review

Facing / end scope

Facing / drawing review

ASME B16.47 large-diameter flanges nominal size and configuration guide
Nominal size	DN	Product	Standard	RFQ review
26"	DN 650	Large-diameter flange	ASME B16.47	Final RFQ
28"	DN 700	Large-diameter flange	ASME B16.47	Final RFQ
30"	DN 750	Large-diameter flange	ASME B16.47	Final RFQ
32"	DN 800	Large-diameter flange	ASME B16.47	Final RFQ
34"	DN 850	Large-diameter flange	ASME B16.47	Final RFQ
36"	DN 900	Large-diameter flange	ASME B16.47	Final RFQ
38"	DN 950	Large-diameter flange	ASME B16.47	Final RFQ
40"	DN 1000	Large-diameter flange	ASME B16.47	Final RFQ
42"	DN 1050	Large-diameter flange	ASME B16.47	Final RFQ
44"	DN 1100	Large-diameter flange	ASME B16.47	Final RFQ
46"	DN 1150	Large-diameter flange	ASME B16.47	Final RFQ
48"	DN 1200	Large-diameter flange	ASME B16.47	Final RFQ
50"	DN 1250	Large-diameter flange	ASME B16.47	Final RFQ
52"	DN 1300	Large-diameter flange	ASME B16.47	Final RFQ
54"	DN 1350	Large-diameter flange	ASME B16.47	Final RFQ
56"	DN 1400	Large-diameter flange	ASME B16.47	Final RFQ
58"	DN 1450	Large-diameter flange	ASME B16.47	Final RFQ
60"	DN 1500	Large-diameter flange	ASME B16.47	Final RFQ

RTI large-diameter availability is not published. Use the technical quotation flow with the current dimensional standard and drawing.

Use the RFQ selector to state product form, NPS / DN, class or schedule, facing or end connection, testing, and documents for review.

Controlled size selector

Configure this alloy requirement.

Use the controlled NPS / DN conversion, then pass size, class or schedule, facing or end connection, and quantity to the RFQ.

Final RFQ confirmation

MaterialProductProduct typeSizePressure classSchedule / boreFacingQuantity

Selected requirement

Nickel 200 | Weld Neck Flange | 6" / DN 150 | Class 600 | RTJ

ASME B16.5. Availability, manufacturing route, and delivery are confirmed against the final RFQ specification.

View technical details Request Technical Quotation

Engineering discussion

Context before component selection.

N02200 and N02201 are intentionally separate

Nickel 200 is commercially pure wrought nickel, while Nickel 201 is a low-carbon variant selected where carbon-related behavior at elevated temperature matters. A buyer should not accept a combined 200/201 label unless the material standard, service temperature, chemistry, and project specification explicitly permit it.

Caustic-service reputation still needs process detail

Nickel 200 is considered for certain chemical and caustic process environments, but concentration, contaminants, temperature, aeration, velocity, startup and cleaning conditions all influence material performance. Provide the actual process envelope for engineering acceptance.

PMI is only one part of pure-nickel verification

A controlled release reconciles the ordered UNS grade with MTC chemistry, heat number, source material, manufacturing condition, dimensions, marking, and inspection records. State any laboratory chemistry confirmation or purchaser witness requirement where handheld identification alone is insufficient.

Standards and release

Define the basis, then document it.

ASTM B564 / ASME SB564

The current ASTM B564 forging scope lists UNS N02200. Confirm the active edition, material condition, mechanical requirements, testing, and supplementary order information.

ASME or drawing dimensions

Select flange form, size, class, facing, bore, gasket interface, and tolerances independently from the pure-nickel material route.

Temperature boundary

Do not extend Nickel 200 into a temperature regime where the project calls for low-carbon Nickel 201; verify the service limit and design basis explicitly.

Applications and next steps

Connect the requirement to the right workflow.

Caustic process equipment enquiries

Chemical production line connections

Food-handling process component reviews

High-purity and controlled-media flange schedules

Nickel Alloy Flanges overviewReview the authoritative nickel alloy flanges product-family route.ASTM B564 GuideUnderstand the verified N02200 forging route.Chemical ProcessingReview medium, temperature, corrosion, and documentation inputs.Request Technical QuotationSend the N02200 flange and process envelope.

Buyer questions

Frequently asked questions.

Does ASTM B564 cover Nickel 200 forgings?

Yes. The current ASTM B564 scope lists UNS N02200. The order should also state edition, condition, dimensions, tests, and supplementary requirements.

Can Nickel 200 and Nickel 201 flanges be treated as identical?

No. Nickel 201 is a low-carbon variant with a different temperature-related selection context. Follow the exact UNS grade authorized by the project.

Should a buyer state operating temperature for Nickel 200?

Yes. Temperature is central to distinguishing Nickel 200 from Nickel 201 and must be reviewed with pressure, medium, code, and material condition.

Which inputs are required for a Nickel 200 flange quotation?

Provide UNS grade, ASTM route, form, dimensions, class, facing, bore, process medium, temperature, tests, documents, quantity, packing, and destination.

Technical quotation

Turn this guidance into a controlled request.

Capture the material, product form, dimensions, standard, inspection, documentation, packing, and destination requirements for review.

Submit Technical RFQ Email Export Desk

Nickel 200 Flanges Manufacturer & Exporter

Key details for your specification.

Flange size and configuration matrix

Flange size and configuration matrix

Configure this alloy requirement.

Context before component selection.

N02200 and N02201 are intentionally separate

Caustic-service reputation still needs process detail

PMI is only one part of pure-nickel verification

Define the basis, then document it.

ASTM B564 / ASME SB564

ASME or drawing dimensions

Temperature boundary

Connect the requirement to the right workflow.

Frequently asked questions.

Turn this guidance into a controlled request.

Have a Technical Requirement?