Material identity
Stainless Steel 316L / UNS S31603
Alloy flanges and fittings
Stainless Steel 316L Pipe Fittings Manufacturer & Exporter
Raymond Tube Industries manufactures, supplies, and exports Stainless Steel 316L / UNS S31603 pipe fittings for defined process, general corrosion, and fabricated piping service. Buyers can define fitting geometry, NPS or DN, schedule or bore, end preparation, construction route, material and dimensional standards, inspection, documentation, packing, quantity, and destination.
Technical snapshot
Key details for your specification.
| Nominal size | DN | Product | Standard | RFQ review |
|---|---|---|---|---|
| 1/2" | DN 15 | Butt-weld fitting | ASME B16.9 | |
| 3/4" | DN 20 | Butt-weld fitting | ASME B16.9 | |
| 1" | DN 25 | Butt-weld fitting | ASME B16.9 | |
| 1-1/4" | DN 32 | Butt-weld fitting | ASME B16.9 | |
| 1-1/2" | DN 40 | Butt-weld fitting | ASME B16.9 | |
| 2" | DN 50 | Butt-weld fitting | ASME B16.9 | |
| 2-1/2" | DN 65 | Butt-weld fitting | ASME B16.9 | |
| 3" | DN 80 | Butt-weld fitting | ASME B16.9 | |
| 4" | DN 100 | Butt-weld fitting | ASME B16.9 | |
| 5" | DN 125 | Butt-weld fitting | ASME B16.9 | |
| 6" | DN 150 | Butt-weld fitting | ASME B16.9 | |
| 8" | DN 200 | Butt-weld fitting | ASME B16.9 | |
| 10" | DN 250 | Butt-weld fitting | ASME B16.9 | |
| 12" | DN 300 | Butt-weld fitting | ASME B16.9 | |
| 14" | DN 350 | Butt-weld fitting | ASME B16.9 | |
| 16" | DN 400 | Butt-weld fitting | ASME B16.9 | |
| 18" | DN 450 | Butt-weld fitting | ASME B16.9 | |
| 20" | DN 500 | Butt-weld fitting | ASME B16.9 | |
| 22" | DN 550 | Butt-weld fitting | ASME B16.9 | |
| 24" | DN 600 | Butt-weld fitting | ASME B16.9 | |
| 26" | DN 650 | Butt-weld fitting | ASME B16.9 | |
| 28" | DN 700 | Butt-weld fitting | ASME B16.9 | |
| 30" | DN 750 | Butt-weld fitting | ASME B16.9 | |
| 32" | DN 800 | Butt-weld fitting | ASME B16.9 | |
| 34" | DN 850 | Butt-weld fitting | ASME B16.9 | |
| 36" | DN 900 | Butt-weld fitting | ASME B16.9 | |
| 38" | DN 950 | Butt-weld fitting | ASME B16.9 | |
| 40" | DN 1000 | Butt-weld fitting | ASME B16.9 | |
| 42" | DN 1050 | Butt-weld fitting | ASME B16.9 | |
| 44" | DN 1100 | Butt-weld fitting | ASME B16.9 | |
| 46" | DN 1150 | Butt-weld fitting | ASME B16.9 | |
| 48" | DN 1200 | Butt-weld fitting | ASME B16.9 |
Engineering discussion
Context before component selection.
Engineering context
Stainless Steel 316L pipe fittings cannot be defined by grade alone. Their engineering review depends on the exact product form, connection geometry, design boundary, material condition where relevant, inspection plan, and the project specification that governs acceptance.
Specification controls
For Stainless Steel 316L Pipe Fittings, the RFQ must turn Stainless Steel 316L / UNS S31603 into a defined material, product-form, dimensional, inspection, document-release, quantity, packing, and delivery record. This avoids using a general alloy or product label as an unapproved technical conclusion.
Procurement decision
Before issuing an order for Stainless Steel 316L Pipe Fittings, reconcile Pipe Fittings with the drawing or piping class, standard edition, test plan, acceptance authority, and certificate requirements. Any deviation, alternative material, or added test is a project engineering decision.
Standards and release
Define the basis, then document it.
Material route
ASTM A182 / ASME SA182 and ASTM A403 / ASME SA403 as applicable
Dimensional route
ASME B16.9 or ASME B16.11 dimensional review
Quality release
MTC, PMI, inspection records, and project document requirements
Applications and next steps
Connect the requirement to the right workflow.
defined process, general corrosion, and fabricated piping service
Specification-led pipe fitting packages
Project piping-class procurement
Drawing and data-sheet enquiries
Buyer questions
Frequently asked questions.
Technical quotation
Turn this guidance into a controlled request.
Capture the material, product form, dimensions, standard, inspection, documentation, packing, and destination requirements for review.
